|
Title & scope of the R&D Project
|
Remarks
|
LOCATION OF PROJECT
|
|
6 Hi Cold Rolling Mill
|
6Hi Cold Rolling Mill for Hero Cycles Limited, Ludhiana, received the prestigious “Outstanding In-house R&D Achievement - 2000” award from DSIR, Govt. of India.
|
Hero Cycles Limited, Ludhiana
|
|
Geo-technical centrifuge
|
Design and Setting up of "National Geotechnical Centrifuge Facility" at IIT Bombay on a turnkey basis. The project was funded by DST, DRDO and Ministry of HRD. Centrifuge modelling is now firmly established as a dependable research tool in geotechnical engineering for seeking solutions to problems relating to foundations, dams, tunnels, off-shore structures, hazardous waste disposal, geo-environmental engineering and earthquake engineering. With appropriate choice of acceleration level and model size, it is possible to simulate the conditions satisfactorily for most applications.
|
IIT Bombay, Mumbai
|
|
Thermoelectric Cold-chain Chest Operated by 12V DC Vehicular Battery
|
Thermoelectric Cold – chain Chests developed by MECON are suitable for use in medical and health-care programs for storing and / or transporting medicines, drugs, vaccines, serum, semen and diagnostic materials for urban as well as rural areas. The project was funded by DST, Govt. Of India, Delhi and successfully completed.
|
DST, Delhi
|
|
Solid State Microclimate Conditioning Unit for Defence Personnel
|
Solid State Microclimate conditioning Unit has been successfully designed, developed and demonstrated for defence personnel working at high ambient temperature or at desert. The Cooling Unit was integrated in MBT ARJUN TANK and successfully demonstrated at CVRDE, Avadi. Final demonstration trials of such Solid State Cooling Unit were conducted at Mahajan Field Firing Range at Rajasthan (Indo-Pak Border) in June 2005. Project was sponsored by DIPAS,(DRDO), Delhi
|
DIPAS, (DRDO), Delhi
|
|
Anti-Tank Missile
|
A critical problem on Anti-Tank Missile was assigned by DRDL, (DRDO) Hyderabad to MECON. The project was Completed Successfully and well accepted by DRDL.
|
by DRDL, (DRDO) Hyderabad
|
|
Heating Gloves and Socks for Defence Personnel
|
MECON has successfully designed and developed battery operated heating Gloves and Socks for Defence Personnel working at sub-zero environment. Project was funded by DIPAS, (DRDO),Delhi.
|
DIPAS, (DRDO), Delhi
|
|
Optical Setting Projector for alignment of finishing mill guides
|
This equipment is used for fast and accurate setting of Roll groves in finishing mill block of high speed wire rod mill. The equipment has been designed, developed and supplied to RINL, Visakhapatnam
|
RINL, Visakhapatnam
|
|
Optical Setting Device for alignment of Entry Roller Guides
|
This equipment is used for accurate setting of entry roller guides in wire rod mills. The equipment was designed, developed and supplied to TISCO, Jamshedpur and RINL, Visakhapatnam.
|
RINL, Visakhapatnam
|
|
Confocal microscope for biological applications
|
Confocal microscopes and its variants are having increasing applications in the fields of biotechnology, surface science, forensic science etc. This project was sponsored by DST, Govt. of India for technology demonstration and was Completed Successfully.
|
MECON, Ranchi
|
|
IR Camera Based Slag Detection System for Converter
|
Based on thermal imaging principle the system is developed to detect the onset of slag during pouring from BOF converter to ladle. The project was sponsored by Ministry of Steel, Govt. of India from Steel Development Fund (SDF) and successfully completed.
|
RSP, Rourkela
|
|
Continuous NOx Monitoring System
|
Based on NDIR principle the system is developed for on-line measurement of Oxides of Nitrogen (NOx) as it causes both acid rain and ozone depletion and there by harmful to the environment and society. The project was sponsored by Ministry of Steel, Govt. of India from Steel Development Fund (SDF) and successfully completed. Patent has been filed.
|
BSP, Bhilai
|
|
On-Line Opacity Monitor
|
Device for on-line measurement of particulate emission. Useful in Steel plants, Cement plants, Process plants etc. The project was funded by Ministry of Environment and Forests, Govt. of India and was successfully completed. Patent has been sealed.
|
MECON, Ranchi
|
|
Laser Line Projection System
|
Laser Line Projection System to align long sheet / plate inside trimming machine was successfully developed and two such systems were supplied to BSP (SAIL).
|
BSP, Bhilai
|
|
Laser Based Positioning System for Alignment of Coke Oven Service Machine
|
This equipment was designed and developed by MECON and supplied to RSP (SAIL) and RINL, Visakhapatnam for alignment of Pusher Car in Coke Oven Batteries.
|
RSP (SAIL) and RINL, Visakhapatnam
|
|
Development of Coke Dry Cooling Technology (CDCT) for Non-recovery Coke Ovens.
|
The objective is to develop / modify the orientation, plant layout, equipments, control system etc. so that CDCT can be suitably installed to serve the non-recovery coke oven battery also. The major development shall be in the area of hot coke receiving from non-recovery Coke Ovens, its transportation to Coke Dry Cooling Plant and lifting for charging into cooling chamber. The project was sponsored by Ministry of Steel, Govt. of India from Steel Development Fund. “Basic Engineering work completed. The project report was submitted to the Ministry and the project was closed”.
|
MECON, Ranchi
|
|
High Efficiency High Temperature Top Fired Stoves
|
The ultimate objective is to independently design, develop and install top fired stove with all indigenous supplies to cater to higher blast temperature demand of Indian Blast Furnace. Outcome of the developmental work was complied as Basic Engineering, Technical specification and Basic & Detailed Engineering drawings. The project was sponsored by Ministry of Steel, Govt. of India from Steel Development fund. The project completion report was submitted to Ministry and project was closed
|
MECON, Ranchi
|
|
Development of Thermoelectrically Cooled / Heated Helmet for Industrial applications.
|
The project was successfully implemented in BSP, Bhilai and completed in December 2012. The project was funded by Ministry of Steel Govt. of India form Steel Development Fund. Two different patents have been filed. MECON has supplied cooling helmets to Bhilai Steel Plant on commercial basis for their usage.
|
BSP, Bhilai
|
|
Infrared camera based ladle condition monitoring system.
|
The project has been sanctioned by Ministry of Steel, Govt. of India. Project was completed successfully in August 2014. Patent filing is in process.
|
RSP, Rourkela
|
|
Development of continuous Multi gas monitor
|
The project was sanctioned by Ministry of Steel, Govt. of India. Project was successfully completed in March 2014. Patent filing is in process.
|
BSP, Bhilai
|
|
3D Modeling and Numerical Simulation of Heat Transfer of Thermoelectric Cooling / Heating Helmet.
|
MOU project with Ministry of Steel. Completed successfully with excellence MOU rating.
|
MECON, Ranchi
|
|
On-line Monitoring of Flue Gas(es).
|
MOU project with Ministry of Steel. Completed successfully with excellence MOU rating.
|
MECON, Ranchi
|
|
Development for Caster Slag Detection through Imaging Technique
|
MOU project with Ministry of Steel. Completed successfully with excellence MOU rating.
|
MECON, Ranchi
|
|
Design, simulation & selection of components for the development of Continuous Multi Gas Monitoring System.
|
MOU project with Ministry of Steel. Completed successfully with excellence MOU rating.
|
MECON, Ranchi
|
|
Design, Development of layout & finalization of broad technical specification of the system for the development of infrared Camera Based Ladle Conditions Monitoring System.
|
MOU project with Ministry of Steel. Completed successfully with excellence MOU rating.
|
MECON, Ranchi
|
|
Infrared Camera Based Ladle condition Monitoring – Development of basic software for operation of PC and IR Camera and its simulation study in our laboratory
|
MOU project with Ministry of Steel. Completed with excellent MOU rating.
|
MECON, Ranchi
|
|
Development of Trolley based portable Battery and / or mains operated Solid State Microclimate Cooling System for Industrial maintenance personnel working at elevated temperature at Steel Plant.
|
MOU project with Ministry of Steel. Completed with excellent MOU rating.
|
MECON, Ranchi
|
|
Coal yard Monitoring using thermal imaging “Basic Study & Experimentation at MECON laboratory”.
|
MOU project with Ministry of Steel. Completed successfully with excellent MOU rating.
|
MECON, Ranchi
|
|
Development of algorithm for positioning of steel ladle required for the development of IR camera based ladle condition monitoring system and validation of the algorithm with the help of a prototype system at R&D Division of MECON.
|
MOU project with Ministry of Steel. Completed successfully with excellent MOU rating.
|
MECON, Ranchi
|
|
Design and Development of one prototype of Non Dispersive Infrared Multi Gas Monitor to be tested at MECON,
|
MOU project with Ministry of Steel. Completed successfully with excellent MOU rating.
|
MECON, Ranchi
|
|
Online Non-contact Dimension Measurement in Steel Industry
|
MOU project with Ministry of Steel. Completed successfully with excellent MOU rating.
|
MECON, Ranchi
|
|
Basic system design and calculation on Solid State Cooling Drinking Water Tank for Armoured Vehicles.
|
MOU project with Ministry of Steel. Completed successfully with excellent MOU rating.
|
MECON, Ranchi
|
|
Conceptual design & Simulation of air warrior Body Ventilation Vest for defence Personnel
|
MOU project with Ministry of Steel. Completed successfully with excellent MOU rating.
|
MECON, Ranchi
|
|
Development of Non-contact linear displacement sensor& limit Switch by laser spotting at R&D Division of MECON, Ranchi
|
MOU project with Ministry of Steel. Completed successfully with excellent MOU rating.
|
MECON, Ranchi
|